 |
UD 7000
Berges electronic’s UD 7000 vector control is the most flexible drive in the Berges electronic Drive family. The powerful software of the UD 7000 packs four drive technologies into one! |
With a simple parameter change it can be a V/Hz inverter, a Sensorless Vector drive, a Flux Vector control, or a Brushless AC servo. Special programming modes multiply the versatility and make the UD 7000 the one stop drive solution for your demanding application needs. UD 7000 models range from 1.5 to 355 kW, operate from 380 to 480 Vac, and housed in a IP20 bookshelf stainless steel enclosure through 55 kW and IP20 wall mount through 355 kW. The UD 7000 comes complete with built-in keypad for control and dynamic braking.
Product Features
- Auto-tuning vector modes
- Torque or speed control
- Adjustable torque limits in each quadrant
- Output frequencies to 875 Hz
- Dual acceleration/deceleration ramps
- Inertia compensation during acceleration and deceleration
- Four point V/Hz characteristic
- Seven preset speeds
- Program Sequencer
- Windows PC software tool (Free Internet download)
- Fault Memory - Last 5 faults
- Plug-in control terminals
- RS485 interface (Standard)
- 2 x 16 character LCD alphanumeric display
- Extensive I/O for customer interface
- 100 kHz, pulse input and pulse output for Master/Slave
- Dynamic braking with internal transistor & resistor - 1.5 - 55 kW
- Adjustable carrier frequencies up to 15 kHz
- Memory of 3 sets of customer parameters
- IP20 Metal enclosure
- Password protected programming
- UL, cUL, CE marked – 1.5–55 kW; CE marked - 1.5 - 355 kW
- External Keypad available
Downloads
Brochures
Manuals
| Operating Instructions Part 1 (1.5 - 55, Software A19.07) |
 |
 |
 |
 |
| Parameter Description Part 2 (1.5 - 55, Software ≥ A19.07) |
|
|
|
|
| Operating Instructions Part 1 (1.5 - 355, Software A20.00) |
|
|
|
|
| Parameter Description Part 2 (1.5 - 355, Software A20.00) |
|
|
|
|
| Operating Instructions Part 1 (1.5 - 355, Software ≥ A20.16) |
 |
|
|
|
| Parameter Description Part 2 (1.5 - 355, Software ≥ A20.16) |
|
|
|
|
| Manual UD 7000/WF2 ProfiBUS DP Linkmodul |
|
|
|
|
Applications
| Setup Instructions for Encoder Option Board ECB/II 7000 |
|
|
|
|
| Operating Instructions Crane Control Application UD 7000 |
|
|
|
|
| Application "Closed-Loop Process Control" with U/f, FO, EC and SLV |
|
|
|
|
| Application 6xx „Closed-Loop Process Control“ with U/f, FO, EC, SLV |
|
|
|
|
| Installation and Reference Manual for the Resolver and Encoder Circuit Boards |
|
 |
|
|
| Installation and Reference Manual for the Resolver Circuit Board |
|
|
|
|
| Operating Instructions Serial Input/Output Converter SIOC02 |
|
|
|
|
| Operating Instructions Serial Input/Output Converter SIOC03 |
|
|
|
|
| Application "Closed-Loop Jockey Roller Position Control" with U/f, FO, EC and SLV |
|
|
|
|
| Assembly Instructions UD 7000 pull relief and EMV assembly set (only for sizes II and III) |
|
|
|
|
| Application "Open-Loop Tensile Force Control" with FO, EC and SLV |
|
|
|
|
Software
|
