 |
SWP
- Smart Drive Plus
AC Variable Speed Drive 0.37–160 kW |
Smart Drive Plus is the natural evolution of the Smart Drive family adding ultimate motor control to established Smart drive benchmarks of control and ease of use.
Smart Drive Plus technology, a revolutionary and patented motor control strategy. Technology delivers 100% torque at 0.0 Hz allowing this unique open loop product to be used without any feedback device in many traditional closed loop applications.
Only the motor name plate data is required to achieve optimum performance, the drive continuously and automatically determines and tracks the key motor characteristics required for vector control.
Smart Drive Plus can be commissioned using the unique Smart Drive CE Plus software designed for use on pocket pc’s. Communication takes place without wires using infrared light to quickly and accurately transfer data.
Product Features
- True evolution of range, maintaining same footprint and connector arrangement as original
- Fast and accurate parameter configuration using unique Smart Drive Manager Plus CE and Smart Drive Manager Plus PC.
- Small mechanical envelope
- Rugged industrial operation 50 °C ambient rating
- Simple mechanical & electrical installation
- Simple operation, powerful features & easy to use
- Fast setup, 14 basic parameters
- Real time motor current, motor speed and kW indication
- Debugging using troubleshooting & P0
- 150% overload for 60 secs (175% for 2 secs)
- Keypad control
- Spin start
- 100% torque at 0.0 Hz (no encoder)
- Built in PID controller for feedback control systems
- Speed regulation <1%
- Torque control
- Dual high speed serial communication interfaces
- Optical (IrDA) interface for commissioning and low bandwidth control systems (115 kbps)
- RS485/ Modbus RTU interface for high bandwidth control (9k6 to 115 kbps)
- Pluggable control terminals
- Easy access key slots for simple installation
- Easy access contactor style power terminals for intuitive easy wiring
- Help card for basic parameter description and terminal layout
- Easy to use keypad with bright LED display
- IP20
- Integral RFI filter
- Integral braking transistor (not size 1)
- 3 phase line choke (size 4, 5 & 6)
- Programmable I/O for flexible control
- 12 bit bipolar analogue input, 8 ms sample time
- 2nd analogue input for PID feedback control systems
- Positive logic digital inputs (active high), 8 ms sampling
- 24 V/100 mA user supply output
- 0..10 V & 4..20 mA analog output, 8 ms update
- Galvanically isolated and short circuit proof
- Silent motor running with 32 kHz ultra-quiet switching
- 8 preset speeds
- Mains dip ride through
- Skip frequency
- Last 4 trips stored
- 2 kHz output frequency
- Parameter lock
- Hours run & kWh meters
- Speed scaling factor for master- slave arrangements
- 2nd deceleration ramp for rapid stop
Downloads
Brochures
| Smart Drive S-Series AC Drives SWP / SWP-VT / SE1 |
 |
 |
 |
 |
| Smart Drive Plus |
|
|
|
|
| SW-MANAGER CE PLUS Unique wireless programming tool |
|
|
|
|
| SWP Drive Manager PC programming tool |
|
|
|
|
Manuals
| Second Relay Output Module |
|
 |
|
|
| SW Dynamic Braking Resistor |
|
|
|
|
| Smart Drive Plus (Software 1.03) |
|
|
|
|
| Smart Drive Plus (Software 2.10) |
 |
|
|
|
| Smart Drive Plus (Software 2.20) |
|
|
|
|
| Smart Drive Plus (Software 2.21) |
|
|
|
|
Software
| SWP Drive Manager PC Version 2.21 |
|
|
|
|
| SWP Drive Manager CE Version 2.2.1 |
|
|
|
|
|
